Siser EasyWeed Glow Information and Guides

Product Information

Siser EasyWeed Glow looks great in the daylight and glows in the dark! This polyurethane heat transfer vinyl is available in white and glows green!

To get the glow effect, "charge" the material by exposing it to sunlight. The more light you give it, the brighter and longer it glows in the dark!

Glow is great for crafters looking to create costumes, candy bags, and cool blanket forts that shine at bedtime.

EasyWeed Glow can even be layered on other Siser materials for an awesome look. Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark!

This HTV is thinner than others offering a one-second tack application that is great for multiple layers.

This vinyl has the advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

The Siser EasyWeed Glow is extremely durable wash after wash and is OEKO-TEX class 1 so it's perfect for decorating children's clothing and accessories.

Suitable for application onto cotton, polyester, poly/cotton blends and even leather (not suited for treated and dye sublimated textiles).

Product Highlights

  • Can be Layered
  • Average Thickness 90 microns

Application Instructions

Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
  3. Place the material on the garment with its polyester backing
  4. Heat apply design at 150°c/305°f
  5. Use medium pressure for 15 seconds
  6. Remove/peel the support carrier warm or cold

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material
  3. Set iron dial between Cotton and Linen
  4. Cover design with kraft paper or non-stick cover sheet
  5. Place on flat, hard surface (ironing board not recommended)
  6. Press iron with medium/firm pressure (do not slide iron)
  7. Press each section of design for 10-15 seconds
  8. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  9. Remove/peel support carrier hot or cold

Cutting Settings

Please note: The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip, and cutting mat wear.

  • Blade: AutoBlade, Standard
  • Setting: Vinyl +
  • Blade: AutoBlade, Fine Point
  • Setting: Heat Transfer (Non-Cricut)
  • Blade: AutoBlade, 3
  • Material: Heat Transfer Smooth
  • Force: 6
  • Speed: 8
  • Blade: Standard, 2
  • Cut Speed:
  • Cut Pressure: 1
  • Blade: AutoBlade
  • Cut Speed:
  • Half Cut: Auto
  • Blade: 45deg
  • Gram Force:
  • Offset: 250
  • Speed: 30-50 cm/s
  • Blade: 45deg
  • Gram Force:
  • Tool: CB09U+0
  • Speed: 30-50 cm/s

After Application Care

The following care instructions are suggested as care guidance, always remember to test new products/applications

  • Leave to let the adhesive to fully cure for 24 hours before Washing
  • Machine wash separately at a maximum of 40°c, inside out
  • Dry on a cotton/low heat only, preferably drip dry
  • Do not bleach or other aggressive chemical agents / dry clean
  • Do not directly iron image, turn the clothing inside out and iron on the reverse

** Please Note: Actual width of Siser EasyWeed is 11.8" +/-, although it is listed as 12" +/- by the manufacture **

Spin to win Spinner icon