#010 - White - Oracal 631 - VinylsGalore

#010 - White - Oracal 631

Regular price
$1.29
Sale price
$1.29
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Vinyl finish type: Matt.

Vinyl Thickness: 80 Microns ±.

Vinyl Durability: Removable.

- +

White Oracal 631 soft matt sign vinyl is ideal for short and medium-term applications rated up to 3 years indoors.

The thickness of Oracal 631 is a 80 +/- micron calendered vinyl, which although sounding thin is 20% thicker than the Oracal 651 but still as strong and maluable, making it easy to Cut/Weed and handle while conveying a greater scratch and abrasion resistance. This give the Oracal 651 range the versatility to be used with virtually all electronic cutting / plotting machines including: Cricut, Silhouette, Brother Scan N Cut etc.

Oracal 631 uses a clear, water-based, polyacrylate, removable adhesive. This makes it perfect for wall decals or temporary signage because you can remove it without damaging your paint or leaving behind very little residue for up to 2 years after installation.

Because of using a water-base adhesive Oracal 631 is water resistant, but not fully waterproof making it not suitable for projects that required to be cleaned on a frequent basis, such as dishware or anything exposed to a lot of water. To clean the Oracal 631 it is advised to just wipe it with a damp cloth.

The release liner is a silicone coated paper that provides excellent weeding conditions and aids the removal of the vinyl from the liner.

This vinyl can be applied to just about any flat, smooth surface that is clean and free of dust and grease. Use it to create fabulous designs to decorate your phones, laptops, cupboards, walls, acrylic, glass, mirrors, markings, letterings, decorations of exhibition stands and materials, creating wall art displays... anything that isn't exposed to water!

Note: Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure before applying the material. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material.

Product Information

Siser EasyWeed (PS Film) heat transfer vinyl is designed for transferring solid colour logos, graphics or text with the advantage of a lower pressure setting for application.

With an adhesive polyester backing, this HTV is thinner than others offering a one-second tack application that is great for multiple layers.

The advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

EasyWeed is REACH Compliment and certified Öko-Tex® Standard 100 Class I and is perfect for use on children and baby wear.

Suitable for application onto cotton, polyester, poly/cotton blends and even leather (not suited for treated and dye sublimated textiles).

Product Highlights

  • Wide range of colours
  • Can be Layered
  • Average Thickness 90 microns

Application Instructions

Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
  3. Place the material on the garment with its polyester backing
  4. Heat apply design at 150°c/305°f
  5. Use medium pressure for 15 seconds
  6. Remove/peel the support carrier warm or cold

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material
  3. Set iron dial between Cotton and Linen
  4. Cover design with kraft paper or non-stick cover sheet
  5. Place on flat, hard surface (ironing board not recommended)
  6. Press iron with medium/firm pressure (do not slide iron)
  7. Press each section of design for 10-15 seconds
  8. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  9. Remove/peel support carrier hot or cold

Cutting Settings

Please note: The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip, and cutting mat wear.

  • Blade: AutoBlade, Standard
  • Setting: Vinyl +
  • Blade: AutoBlade, Fine Point
  • Setting: Heat Transfer (Non-Cricut)
  • Blade: AutoBlade, 3
  • Material: Heat Transfer Smooth
  • Force: 6
  • Speed: 8
  • Blade: Standard, 2
  • Cut Speed:
  • Cut Pressure: 1
  • Blade: AutoBlade
  • Cut Speed:
  • Half Cut: Auto
  • Blade: 45deg
  • Gram Force:
  • Offset: 250
  • Speed: 30-50 cm/s
  • Blade: 45deg
  • Gram Force:
  • Tool: CB09U+0
  • Speed: 30-50 cm/s

After Application Care

The following care instructions are suggested as care guidance, always remember to test new products/applications

  • Leave to let the adhesive to fully cure for 24 hours before Washing
  • Machine wash separately at a maximum of 40°c, inside out
  • Dry on a cotton/low heat only, preferably drip dry
  • Do not bleach or other aggressive chemical agents / dry clean
  • Do not directly iron image, turn the clothing inside out and iron on the reverse

** Please Note: Actual width of Siser EasyWeed is 11.8" +/-, although it is listed as 12" +/- by the manufacture **



Spin to win Spinner icon