DUE TO COVID-19, ORDER DELAYS ARE EXPECTED

Powder Blue - Siser EasyWeed HTV - VinylsGalore

Powder Blue - Siser EasyWeed HTV

Regular price
$5.00
Sale price
$5.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.
- +

Siser EasyWeed (PS Film) heat transfer vinyl is designed for transferring solid colour logos, graphics or text with the advantage of a lower pressure setting for application.

This HTV is thinner than others offering a one-second tack application that is great for multiple layers .

This vinyl has the advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

The Siser EasyWeed is extremely durable wash after wash and is OEKO-TEX class 1 so it's perfect for decorating children's clothing and accessories.

EasyWeed Applies to:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Washing & Care
  • Cutter Settings
  • Application Guidance
  • Wait 24 hours after heat transfer before 1st wash.
  • Do not use bleach or other aggressive chemical agents.
  • Do not dry clean.
  • Machine wash seperately at 40°c/104°f maximum.
  • Dry on a cotton cycle or low heat only.
  • Do not iron directly on image.

Settings may vary based on blade condition and age of the machine. Always perform a test cut prior to cutting designs.

Cricut:

  • Blade: Standard
  • Setting: Iron-on


Silhouette Cameo:

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6


Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1


Roland GS/GX-24:

  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s


Graphtec:

  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09U+0
  • Speed: 30 cm/s


MH, SC2, LP3, and Titan 1:

  • Blade: 45°/60°
  • Gram Force: 80-85
  • Speed: 300mm/s
  • *Blade Advancing Varies


Titan 2 & 3:

  • Blade: 45°/60°
  • Gram Force: 60-65
  • Speed: 300mm/s
  • *Blade Advancing Varies

Heat Press:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
  3. Place the material on the garment with its polyester backing
  4. Heat apply design at 150°c/305°f
  5. Use medium pressure for 15 seconds
  6. Remove/peel the support carrier warm or cold

*Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

Iron:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material
  3. Set iron dial between Cotton and Linen
  4. Cover design with kraft paper or non-stick cover sheet
  5. Place on flat, hard surface (ironing board not recommended)
  6. Press iron with medium/firm pressure (do not slide iron)
  7. Press each section of design for 10-15 seconds
  8. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  9. Remove/peel support carrier hot or cold

*Tests recommended as due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

** Please Note: Actual width of Siser EasyWeed is 11.8" +/-, although it is listed as 12" +/- by the manufacture **

Spin to win Spinner icon