Siser Glitter heat transfer vinyl is designed for transferring solid glitter colour logos, graphics or text. Giving attractive designs with eye catching sparkle,
This HTV is made of high thickness glitters and adhesive on a polyester backing.
This vinyl has the advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.
The Siser Glitter is extremely durable wash after wash and is OEKO-TEX class 1 so it's perfect for decorating children's clothing and accessories, making it perfect for cheer teams and anywhere you just need a little extra sparkle as kids of all ages love the shimmer and pop.
Siser Glitter Applies to:
- 100% cotton
- Poly/cotton blends
- 100% polyester
- Leather
- Washing & Care
- Cutter Settings
- Application Guidance
- Wait 24 hours after heat transfer before 1st wash.
- Do not use bleach or other aggressive chemical agents.
- Machine wash seperately at 40°c/104°f maximum.
- Do not tumble dry, only air dry.
- Do not iron directly on image.
Settings may vary based on blade condition and age of the machine. Always perform a test cut prior to cutting designs.
Cricut:
- Blade: Autoblade, Standard
- Setting: Iron-On +
Silhouette Cameo:
- Blade: AutoBlade, 4
- Material: Heat Transfer, Glitter
- Speed: 8
- Force: 11
Scan N Cut:
- Blade: 3
- Cut Speed: 5
- HalfCut: 5
Roland GS/GX-24:
- Blade: 45°
- Gram Force: 180-190
- Offset: .250
- Speed: 30-50 cm/s
Graphtec:
- Blade: 45°
- Gram Force: 17-18
- Tool: CB09U+0
- Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
- Blade: 45°
- Gram Force: 100-110
- Speed: 300mm/s
- *Blade Advancing Varies
Titan 2 & 3:
- Blade: 45°/60°
- Gram Force: 100-110
- Speed: 300mm/s
- *Blade Advancing Varies
Heat Press:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf
- Mirror cut the material
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
- Place the material on the garment with its polyester backing
- Heat apply design at 160°c/320°f
- Use medium pressure for 15-20 seconds
- Remove/peel the support carrier warm (at least 15 seconds off press)
*Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.
Iron:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf
- Mirror cut the material
- Weed the exceeding material
- Set iron dial between Cotton and Linen
- Cover design with kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 15-20 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Remove/peel support carrier warm
*Tests recommended as due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.
** Please Note: Actual width of Siser Glitter is 11.8" +/-, although it is listed as 12" +/- by the manufacture **
