Purple - Siser EasyWeed HTV - VinylsGalore

Purple - Siser EasyWeed HTV

Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.
- +

Product Information

Siser EasyWeed (PS Film) heat transfer vinyl is designed for transferring solid colour logos, graphics or text with the advantage of a lower pressure setting for application.

With an adhesive polyester backing, this HTV is thinner than others offering a one-second tack application that is great for multiple layers.

The advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

EasyWeed is REACH Compliment and certified Öko-Tex® Standard 100 Class I and is perfect for use on children and baby wear.

Suitable for application onto cotton, polyester, poly/cotton blends and even leather (not suited for treated and dye sublimated textiles).

Product Highlights

  • Wide range of colours
  • Can be Layered
  • Average Thickness 90 microns

Application Instructions

Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
  3. Place the material on the garment with its polyester backing
  4. Heat apply design at 150°c/305°f
  5. Use medium pressure for 15 seconds
  6. Remove/peel the support carrier warm or cold

Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material
  3. Set iron dial between Cotton and Linen
  4. Cover design with kraft paper or non-stick cover sheet
  5. Place on flat, hard surface (ironing board not recommended)
  6. Press iron with medium/firm pressure (do not slide iron)
  7. Press each section of design for 10-15 seconds
  8. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  9. Remove/peel support carrier hot or cold

Cutting Settings

Please note: The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip, and cutting mat wear.

  • Blade: AutoBlade, Standard
  • Setting: Vinyl +
  • Blade: AutoBlade, Fine Point
  • Setting: Heat Transfer (Non-Cricut)
  • Blade: AutoBlade, 3
  • Material: Heat Transfer Smooth
  • Force: 6
  • Speed: 8
  • Blade: Standard, 2
  • Cut Speed:
  • Cut Pressure: 1
  • Blade: AutoBlade
  • Cut Speed:
  • Half Cut: Auto
  • Blade: 45deg
  • Gram Force:
  • Offset: 250
  • Speed: 30-50 cm/s
  • Blade: 45deg
  • Gram Force:
  • Tool: CB09U+0
  • Speed: 30-50 cm/s

After Application Care

The following care instructions are suggested as care guidance, always remember to test new products/applications

  • Leave to let the adhesive to fully cure for 24 hours before Washing
  • Machine wash separately at a maximum of 40°c, inside out
  • Dry on a cotton/low heat only, preferably drip dry
  • Do not bleach or other aggressive chemical agents / dry clean
  • Do not directly iron image, turn the clothing inside out and iron on the reverse

** Please Note: Actual width of Siser EasyWeed is 11.8" +/-, although it is listed as 12" +/- by the manufacture **

Spin to win Spinner icon