| WE WILL BE CLOSED JULY 31 - AUG 2 |

Glow in The Dark - Siser EasyWeed Glow HTV - VinylsGalore

Glow in The Dark - Siser EasyWeed Glow HTV - 15" x 12"

Regular price
$8.50
Sale price
$8.50
Regular price
$0.00
Sold out
Unit price
per 
Shipping calculated at checkout.
- +

Siser EasyWeed Glow looks great in the daylight and glows in the dark! This polyurethane heat transfer vinyl is available in white and glows green!

To get the glow effect, "charge" the material by exposing it to sunlight. The more light you give it, the brighter and longer it glows in the dark!

Glow is great for crafters looking to create costumes, candy bags, and cool blanket forts that shine at bedtime.

EasyWeed Glow can even be layered on other Siser materials for an awesome look. Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark!

This HTV is thinner than others offering a one-second tack application that is great for multiple layers .

This vinyl has the advantage that it can be peeled hot or cold and does not lift during weeding, this combined with a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

The Siser EasyWeed Glow is extremely durable wash after wash and is OEKO-TEX class 1 so it's perfect for decorating children's clothing and accessories.

EasyWeed Applies to:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Washing & Care
  • Cutter Settings
  • Application Guidance
  • Wait 24 hours after heat transfer before 1st wash.
  • Do not use bleach or other aggressive chemical agents.
  • Do not dry clean.
  • Machine wash seperately at 40°c/104°f maximum.
  • Dry on a cotton cycle or low heat only.
  • Do not iron directly on image.

Settings may vary based on blade condition and age of the machine. Always perform a test cut prior to cutting designs.

Cricut:

  • Blade: Standard
  • Setting: Vinyl+


Silhouette Cameo:

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6


Scan N Cut DX:

  • Blade: AutoBlade
  • Cut Speed: 5
  • Half Cut: Auto


Roland GS/GX-24:

  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 30-50 cm/s


Graphtec:

  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09U+0
  • Speed: 30 cm/s


Titan 2 & 3:

  • Blade: 45°/60°
  • Gram Force: 80-85
  • Speed: 300mm/s
  • *Blade Advancing Varies

Heat Press:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material (for a quick and easier weeding, we suggest to place the cut material for 2 to 3 seconds on a warm surface such as the plates at 60-70°C/140-160°f)
  3. Place the material on the garment with its polyester backing
  4. Heat apply design at 150°c/305°f
  5. Use medium pressure for 10-15 seconds
  6. Remove/peel the support carrier warm or cold

*Due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

Iron:
Vinyl Cutter/Plotter Settings: Blade: new at 45°
Minimum required pressure: 60gf

  1. Mirror cut the material
  2. Weed the exceeding material
  3. Set iron dial between Cotton and Linen
  4. Cover design with kraft paper or non-stick cover sheet
  5. Place on flat, hard surface (ironing board not recommended)
  6. Press iron with medium/firm pressure (do not slide iron)
  7. Press each section of design for 10-15 seconds
  8. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  9. Remove/peel support carrier hot or cold

*Tests recommended as due to the many different base materials available on the market, these heat transfer instructions are given as a guideline only.

** Please Note: Actual width of Siser EasyWeed Glow is 11.8" +/-, although it is listed as 12" +/- by the manufacturer **

Spin to win Spinner icon